Fork Removal:
1. Remove the bolt connecting the fork to the rear fork.
Front Wheel Removal:
(Operations similar to the initial installation of the wheel)
1. Flip the bicycle and stabilize it on the handlebars.
2. Use a wrench to loosen the two front wheel bolts on both sides. Locate and loosen the front wheel bolts, then remove them with a wrench.
3. Remove the front wheel. Lift the front wheel gently off the front fork.
Rear Wheel Removal:
1. Flip the bicycle upside down, remove the fork (as mentioned above), and then unscrew the bolt connecting the rear wheel.
2. Cut the tie wrap and disconnect the motor wires.
3. Remove the derailleur and lift the rear wheel. Separate the rear wheel by removing the brake rotor (refer to the brake rotor replacement guide).